The retail store is closed. Leftover stock is still for sale, and the bench is open for servicing. See what's left

KNC Keys

Switch lubing and filming, done by hand

Mail your switches in. I open every one, brush the lube on, film it if you want, and send them back. Nothing is tumbled or sprayed.

Start a lubing orderSee the queue

One order form covers everything. Add other services or anything from Leftovers to the same order and it's still one invoice.

What gets lubed, and what doesn't

Showing lube marks for
Linear: the two small leaf arms are lubed where the stem touches them.
  • Top housingLeft dry.
  • StemAll four sides, in a thin coat. The pole and the tip stay dry.
  • SpringLubed, so it stops pinging.
  • Bottom housingThe rails and the inside back wall.
  • Leaf, on linearsThe two small arms where the stem touches. Not the top of the leaf.
  • Leaf, on tactilesLeft dry. A small bead of lube goes behind each leaf. That stops the ping without dulling the bump.
  • FilmOptional. A thin film between the two housings that tightens them and cuts wobble.

Hear the difference

The same switch, recorded dry and then lubed. Both clips play at the same volume.

The homepage has the same switch as a cutaway you can press.

Lube, films and extras

Which lube

I keep 205g0, 206g0, 3203 and 3204 on the bench. Name one in the order notes, or leave it to me and I'll pick what suits the switch. Sending your own lube or films is fine, and it costs less per switch.

Ultrasonic clean

$2.50 per 18 switches, done before lubing. Worth it for used switches with dust or old lube in them.

Partial jobs

Stem and spring only is $0.25 a switch with your lube or $0.30 with mine. Bottom housing only is $0.20. Springs only is $0.08. Spring swaps and stem swaps are $0.07, and frankenswitch assembly is $0.10. They're all in the full list on the order form, under Show every service.

Switches still in a keyboard

On a hot-swap board I pull the switches, lube them and put them back. That adds the $20 hot-swap build. On a soldered board the switches have to be de-soldered first ($35) and soldered back in after (from $35, by size). Tell the form what you're sending and it adds the right lines.

Need switches

Pick them from Leftovers and add them to the same order. Packs can go in already hand-lubed.

From people who sent theirs in

Unedited, from the 390 reviews the shop collected.

Amazing and quick lube and film job that is even across all the switches I have opened up. Not to mention THE best customer service I have ever experienced as well. I asked a question and literally got an answer about 2 minutes later. Great first experience and will definitely be a returning customer.

Glenn M., April 2023

Job was done extremely well and there is not a single dud out of the whole lot of switches I asked to be lubed. It's a great job all around and a really fair price for it.

Warhopper, September 2022

I really love my new keys. Paying for the lube and filming was a no-brainer. I despise working on switches because I'm clumsy and my hands are very large. The speed, price, and quality of the lube and film service is superb. Very happy and will buy again.

Matthew B., April 2024

How an order works

  1. Fill in the order form. A PayPal invoice for the work lands in your inbox right away.
  2. Pay the invoice. Goods & Services only, never Friends & Family, so your payment stays protected.
  3. I email you the address. You send your parts in.
  4. I do the work.
  5. It comes back packed properly and shipped with tracking. Return shipping is invoiced once it's ready to go.

There's no guaranteed lead time. One person, one queue. The queue page shows where things stand right now, and if something is time-sensitive, tell me up front.

Questions

How much does it cost to have switches lubed?

$0.35 a switch if you send the lube, $0.40 if I supply it. Lube and film is $0.40 to $0.50 a switch depending on who supplies the lube and films. A 68-switch board lubed with my lube is $27.20.

Do you lube linear and tactile switches the same way?

No. On linears I lube the two small leaf arms where the stem touches. On tactiles the leaf stays dry and a small bead of lube goes behind each leaf, which stops the ping without dulling the bump.

Do I need to send lube or films?

No. Pick that KNC Keys supplies them and it's included in the price. If you send your own, the price per switch drops.

How long does it take?

There's no guaranteed lead time. It's one person and one queue. The queue page shows what's on the bench right now. If it's time-sensitive, tell me up front and we'll work something out.

How do I pay?

Sending the order emails you a PayPal invoice. Nothing is charged until you pay it. It's Goods & Services only, never Friends & Family, so your payment stays protected.

Who pays shipping?

You cover sending your parts to me. I invoice the return shipping once the work is done.

Send them in

The form asks what you're sending and what you want done, then totals it as you go. Lube is already picked when you open it from here.

Start a lubing orderAsk a question first